EBT Filler Sand (Olivine Based) P-OLIAFILL-40
EBT Filler Sand (Olivine Based) P-OLIAFILL-40 is based on olivine sand and is used to fill the eccentric bottom tapping (EBT) channel of electric arc furnaces before tapping, so that the channel opens freely when the slide gate or tap hole is opened. Grain size: 2 – 7 mm.
- Product family
- EBT Filler Sand
- Last updated
Product overview & application
About EBT Filler Sand (Olivine Based) P-OLIAFILL-40
EBT Filler Sand (Olivine Based) P-OLIAFILL-40 is based on olivine sand and is used to fill the eccentric bottom tapping (EBT) channel of electric arc furnaces before tapping, so that the channel opens freely when the slide gate or tap hole is opened. Grain size: 2 – 7 mm.
The filler sand is poured into the eccentric bottom tapping (EBT) channel of electric arc furnaces before the steel is tapped. The layer in contact with the melt sinters, while the rest stays loose, so the sand runs out and the steel flows without oxygen lancing when the channel is opened. A suitable chemistry and grain size increase the free-opening rate.
Technical properties
- Grain size: 2 – 7 mm
- MgO: 43 – 48%
- SiO2: 39 – 42%
- Cr2O3: 0.2 – 0.6%
- Fe2O3: 6 – 9%
- Al2O3: 0.2 – 0.4%
Packaging and storage
Packaging: Approx. 1000 kg big bags. Shelf life: Unlimited. Use: dry filling of the channel.
To choose the right sand, share your furnace and operating requirements with the Pas Espadana technical team.
Applications
- Filling the EBT tap hole of electric arc furnaces before tapping
Information needed for review
- Furnace type and capacity
- Tapping temperature and holding time
- Consumption history and free-opening rate
- Required packaging
Technical specifications
| Grain size | 2 – 7mm |
|---|---|
| Al2O3 | 0.2 – 0.4% |
| MgO | 43 – 48% |
| CaO | 0.3 – 0.8% |
| Fe2O3 | 6 – 9% |
| SiO2 | 39 – 42% |
| Cr2O3 | 0.2 – 0.6% |
| Loss on ignition (L.O.I.) | Max. 6% |
| Installation | Dry filling of the channel |
Selection based on your conditions
Contact our technical team to review grades, supply and to receive a valid document.
Request product consultation
